Rack conveyor dishwashers

• Fully stainless steel jacket.
• Inlet and outlet splash guards are standard (starting from SRC-2200).
• Stainless steel central rack feed system equipped with a torque limited by friction in case of blocking.
• Process cycles are divided by rubber curtains.
• Automatic cycle start.
• Automatic boiler filling.
• Precise temperature control by high precision temperature probes. The temperatures are easy to adjust and visualize.

Economy

• Washing microswitch that starts washing pumps when racks have been loaded.
• Washing pump working timing.
• Energy saving rinse supply switch.
• Pressure controller in the rinse section to limit consumption.
• Programmed automatic stop if there is no loading.
• Stop and freezing of timer when limit switch actuates.

Cleaning and maintenance

• Wide pivoting door allowing access for cleaning or inspection purpose.
• Detachable arms and dispersers for easier cleaning.
• Sloped removable stainless steel filters with independent removable basket (SRC-1800 without basket).
• Easy boiler emptying by loosening a hose.
• Failures are easily detected thanks to the warning lights.
• Easy to repair without moving the machine.

Choose the drying option you need

• Internal stainless steel baffle is designed for the optimum use of hot air.
• Thermostatically controlled temperature.
• Two powerful model options available (TS-600 / TS-800).
• Space-saving drying unit for corner situation (TS-90).
• Conveyor system.
• Design allows drainage of excess condense water.

Tailor-made extraction system 

CA: extraction hood

• SRC-1800: CA extraction hood for SRC-1800 consists of a splash shield equipped with an outlet to connect to a remote extraction unit.
• SRC-2200/5000: CA extraction hood consists of a splash guard equipped with an outlet to connect to a remote extraction unit. Please note: all models starting from SRC-2200 without EV extraction hood with motor or CV steam condenser will be delivered with CA extraction hood.
• Outlet-diameter: 176 mm.
• Avoids splashing of the dish coming out of the machine.

EV: extraction hood with motor

• EV extraction hood unit consists of a steam extraction hood equipped with a 550 W. motor that allows extraction.
• Complete with removable fat filter.
• Outlet-diameter: 176 mm.

CV: extraction hood with steam condensation

• To avoid steam without having to install an extraction hood.
• Its design allows the increase of water inlet temperature and sends it to the rinsing circuit.
• This function allows to save energy and recover a big percentage of water destined for steam condensation.
• 0.75 kW fan in vertical position and motor with double retainer prevents water leakage into the motor.
• Removable filter to avoid fat leakage.